LTE Category |
- Peak DL: Cat 12 (Up to 600Mbps DL)
- Peak UL: Up to 150 Mbps UL
|
Frequency Bands |
- 4G: 2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 2600(B7), 900(B8), 1800(B9), 700(B12), 700(B13), 850(B18), 850(B19), 800(B20), 850(B26), 700(B28), 700(B29), 2300(B30), 1500(B32), TDD B41, TDD B42, TDD B43, TDD B46, CBRS B48, 1700(B66)
- 3G: 2100(B1), 1900(B2), AWS(B4), 850(B5), 800(B6), 900(B8), 1700(B9), 850(B19)
|
Host Interfaces |
- 10/100/1000 Ethernet (RJ45)
- RS-232 serial port (DB-9)
- USB 2.0 Micro-B Connector
- 3 SMA antenna (cellular, diversity, Active GNSS)
- 2 RP-SMA antenna (1x1 Wi-Fi, Optional)
- LTE-M/NB-IoT: 1 SMA (cellular) only, no GNSS or Wi-Fi
- Active GPS antenna support
|
Wi-Fi (Optional)
|
- Dual Band 2.4/5GHz Wi-Fi
- Dual Radio, 802.11 b/g/n/ac (Wave2 Client Mode)
- Support for 10 clients, WPA2 Enterprise per radio
- Output power 16dBm
- Configurable as Dual Band Access Point (AP) or AP+Client Mode
- Single SSID Support per radio
- Captive Portal
|
Operating Temperature
|
- Operating: -30° to 70° C
- Storage: -40°C to +85°C
|
Input / Output
|
- Configurable I/O pin on power connector
- Digital Input ON Voltage: 2.7 to 36 VDC
- Configurable Pull-up for dry contact input
- Digital Open Collector Output > sinking 500 mA
- Analog Input: 0.5-36 VDC
|
Device Dimensions
|
- 119 mm x 33 mm x 85 mm (102 mm including Wi-Fi connectors)
|
Network Management
|
- Secure mobile network & asset management application available in the cloud or licensed platform in the enterprise data center
- Fleet wide firmware upgrade delivery
- Router configuration and template management
- Router staging over the air and local Ethernet connection
- Over-the-air software and radio module firmware updates
- Device Configuration
- Templates Configurable monitoring and alerting
- Remote provisioning and airtime activation (where applicable)
|
Security
|
- Remote Authentication (LDAP, RADIUS, TACACS+, DMZ)
- Inbound and Outbound Port filtering
- Inbound and Outbound Trusted IP
- MAC Address Filtering
- PCI compatible
- Secure Firmware Update
|
Power
|
- Input Voltage: 7 to 36 VDC LTE
- Idle Power: 900mW (75 mA @ 12VDC)
- Standby Mode Power: 53 mW (4.4 mA @ 12 VDC) triggered on low voltage, I/O or periodic timer
- Low voltage disconnect to prevent battery drain
- Built-in protection against voltage transients including 5 VDC engine cranking and +200 VDC load dump
- Ignition Sense with time delay shutdown
- Configurable features and ports to optimize power consumption
|