-
Renfell | Transition Cable
The IDC10-DB9M transition cable enables equipment with a standard D9 connector to be easily attached to the Renfell RS232-4W or RS485-2W IoT...
-
The Renfell Engineering Single Port USB Host IoT card enables the user to add an additional Type ‘A’ USB host port to Sierra Wireless mangOH or...
-
Renfell | IoT Connector for Sierra Wireless AirLink FX30
IoT Connectors + cover plate for use with Sierra Wireless AirLink FX30
Available in the following variants:
RS232 4 Wire
RS485 2 Wire
RS422/...
-
Renfell | IoT Card Mating Plug
5 Position Mating Plug for use with Renfell IoT Connectors for Sierra Wireless AirLink FX30 modem.
-
Renfell | IoT Card for mangOH
The Renfell Engineering Interface IoT Connector enables the developer to access some of the I/O interfaces of the mangOH development board without...
-
The Renfell Engineering USB – RS232 4 Wire IoT Connector allows the user to add additional high-speed RS232 serial devices to the Sierra Wireless...
-
The Renfell Engineering RS485 2 Wire IoT Connector enables the mangOH development board to connect to devices and networks that use the half duplex...
-
The Renfell Engineering UART RS232 4 Wire IoT card allows the user to access the onboard hardware UART interface on the mangOHTM development board....
-
IoT Connector + cover plate for use with Sierra Wireless AirLink FX30
-
IoT Connector + cover plate for use with Sierra Wireless AirLink FX30
-
IoT Connector + cover plate for use with Sierra Wireless AirLink FX30
Renfell | Transition CableThe IDC10-DB9M transition cable enables equipment with a standard D9 connector to be easily attached to the Renfell RS232-4W or RS485-2W IoT...
Renfell | IoT ConnectorThe Renfell Engineering Single Port USB Host IoT card enables the user to add an additional Type ‘A’ USB host port to Sierra Wireless mangOH or...
Renfell | IoT Connector for Sierra Wireless AirLink FX30IoT Connectors + cover plate for use with Sierra Wireless AirLink FX30 Available in the following variants: RS232 4 Wire RS485 2 Wire RS422/...
Renfell | IoT Card Mating Plug5 Position Mating Plug for use with Renfell IoT Connectors for Sierra Wireless AirLink FX30 modem.
Renfell | IoT Card for mangOHThe Renfell Engineering Interface IoT Connector enables the developer to access some of the I/O interfaces of the mangOH development board without...
Renfell | IoT CardThe Renfell Engineering USB – RS232 4 Wire IoT Connector allows the user to add additional high-speed RS232 serial devices to the Sierra Wireless...
Renfell | IoT CardThe Renfell Engineering RS485 2 Wire IoT Connector enables the mangOH development board to connect to devices and networks that use the half duplex...
Renfell | IoT CardThe Renfell Engineering UART RS232 4 Wire IoT card allows the user to access the onboard hardware UART interface on the mangOHTM development board....
Renfell | IoT CardIoT Connector + cover plate for use with Sierra Wireless AirLink FX30
Renfell | IoT CardIoT Connector + cover plate for use with Sierra Wireless AirLink FX30
Renfell | IoT CardIoT Connector + cover plate for use with Sierra Wireless AirLink FX30
