AirLink Mounting Bracket For LS300 Mounting Brackets Flat Surface Mount for mounting the LS300 on a flat surface, Buy now Product DetailsFeatures The kit contains: Bracket – Qty 1 Screw M3 – Qty 4 Screw M4 – Qty 4 To mount the LS300 on a flat surface using the mounting bracket: Line up the LS300 with either set 1 or set 2 holes in the flat back of the bracket, depending on the desired orientation (see Figure 2-6: Airlink LS300 User Guide). Attach the LS300 to the bracket with the three mounting screws. Attach the bracket/LS300 combination to the mounting surface Connect the bracket to ground (the battery or power source negative terminal) by connecting a grounding strap under one of the mounting bracket screws. This provides protection from electrostatic discharges. Bracket Measurements: 119mm wide x 70mm high; raised area 89mm wide (6mm rise from flat surface); 30mm main screw hole area width; main screw positions on bracket at 106mm width x 60mm high Related Products AirLink Mounting Bracket DIN Mount For LS300 AirLink LS300 AirLink DC Power Cable For for LS, GX, RV, ES, MP Series Contact us for help Not sure of the right products for your requirements? Click here.