GV-86 GNSS Module Furuno | GNSS Module With Dead Reckoning SupportGV-86 is the high sensitivity GPS Receiver Module supporting Dead Reckoning (DR) function enabling positioning in environments where no satellite signals are received. Product DetailsFeatures Supports GPS, QZSS and SBAS In addition to high position accuracy, GV-86 achieves superior performance as regular GPS Receiver Modules such as fast TTFF, highly improved Noise Tolerance Galileo Ready. The software can be upgraded to support concurrent Multi-GNSS reception with GPS, Galileo, QZSS and SBAS Advanced DR Performance Achieved DR performance in car navigation systems with a stand-alone GPS module Offsets misalignments and position jumps of GPS, complements position during GPS signal outages Dead Reckoning positioning accuracy can be improved with feedback from the navigation application (Map Matching Feedback function) Emphasis on usability of Dead Reckoning, no need for sensor processing on host CPU Selectable from 3 different sensor configurations depending on customer’s product concept 1. Gyro + Accelerometer 2. Gyro + Speed pulse 3. Wheel tick data of two non-turning wheels (Sensor-less) Autonomous, self-calibrating, tightly coupled Dead-Reckoning. Dead Reckoning calculation is performed on the module and the results outputted in NMEA data Auto Orientation Function Flexible installation with original axial correction Sensors can be mounted sideways, on inclined surfaces, upside-down Adapted for installation on inclined surface of the dashboards Designed for real-life usage Evaluates driving patterns under actual environment Adapted for various cases causing large position errors such as “turn table”, “low-speed U-turn” etc. Fast TTFF Hot start: <1 sec High Positioning Rate Configurable position output update rate up to 10Hz (10 times per sec.) Improved Noise Tolerance Reduces effects of internal and external noise Active Anti-Jamming Advanced Multipath Mitigation Embedded Flash ROM Suitable for long-term use backed by FURUNO’s continuous support and function enhancement Suitable for Automotive Applications Market’s standard size, superior design for assembly 24Pin LCC (Leadless Chip Carrier) 12.2mm x 16.0mm x 2.8mm Visible soldering condition with end-face electrodes Specification GNSS Reception Capability GPS L1 C/A, SBAS L1 C/A, QZSS L1 C/A (Available by software update) Galileo E1B/E1C, QZSS L1-SAIF GNSS Reception 16 channels (GPS, SBAS, QZSS) Update Rate (Configurable) Dead Reckoning: 1 / 2 / 5 / 10 Hz Sensitivity (*1) GPS Tracking: -161 dBm Hot Start: -161 dBm Warm Start: -147 dBm Cold Start: -147 dBm Reacquisition: -161 dBm Position Accuracy (Horizontal) (*1) (*2) GPS：2.5m（CEP） GPS+SBAS：2.0m（CEP） Dead Reckoning Performance Running Distance * 5% TTFF(Typical) (*1) Hot Start: <1 sec (@-130 dBm) Warm Start: 30 sec (@-130 dBm) Cold Start: 33 sec (@-130 dBm) Supply Voltage 3.3V DC Power Consumption Acquisition Mode: 68 mA Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C Package Size 12.2mm × 16.0mm × 2.8mm 24Pin LCC（Leadless Chip Carrier） Protocol eSIP (NMEA 0183 Standard Ver. 4.10) Anti-jamming Available Multipath Mitigation Available (*1) (*2) (*1) Measurement platform with recommended active antenna (*2) Update rate: 1 Hz Contact us for help Not sure of the right products for your requirements? Click here.