LTE Category |
-
Peak DL: Cat 12 (Up to 600Mbps DL)
-
Peak UL: Up to 150 Mbps UL
|
Frequency Bands |
-
4G: 2100(B1), 1900(B2), 1800(B3), AWS(B4), 850(B5), 2600(B7), 900(B8), 1800(B9), 700(B12), 700(B13), 850(B18), 850(B19), 800(B20), 850(B26), 700(B28), 700(B29), 2300(B30), 1500(B32), TDD B41, TDD B42, TDD B43, TDD B46, CBRS B48, 1700(B66)
-
3G: 2100(B1), 1900(B2), AWS(B4), 850(B5), 800(B6), 900(B8), 1700(B9), 850(B19)
|
Host Interfaces |
-
10/100/1000 Ethernet (RJ45)
-
RS-232 serial port (DB-9)
-
USB 2.0 Micro-B Connector
-
3 SMA antenna (cellular, diversity, Active GNSS)
-
2 RP-SMA antenna (1x1 Wi-Fi, Optional)
-
LTE-M/NB-IoT: 1 SMA (cellular) only, no GNSS or Wi-Fi
-
Active GPS antenna support
|
Wi-Fi (Optional)
|
-
Dual Band 2.4/5GHz Wi-Fi
-
Dual Radio, 802.11 b/g/n/ac (Wave2 Client Mode)
-
Support for 10 clients, WPA2 Enterprise per radio
-
Output power 16dBm
-
Configurable as Dual Band Access Point (AP) or AP+Client Mode
-
Single SSID Support per radio
-
Captive Portal
|
Operating Temperature
|
-
Operating: -30° to 70° C
-
Storage: -40°C to +85°C
|
Input / Output
|
-
Configurable I/O pin on power connector
-
Digital Input ON Voltage: 2.7 to 36 VDC
-
Configurable Pull-up for dry contact input
-
Digital Open Collector Output > sinking 500 mA
-
Analog Input: 0.5-36 VDC
|
Device Dimensions
|
-
119 mm x 33 mm x 85 mm (102 mm including Wi-Fi connectors)
|
Network Management
|
-
Secure mobile network & asset management application available in the cloud or licensed platform in the enterprise data center
-
Fleet wide firmware upgrade delivery
-
Router configuration and template management
-
Router staging over the air and local Ethernet connection
-
Over-the-air software and radio module firmware updates
-
Device Configuration
-
Templates Configurable monitoring and alerting
-
Remote provisioning and airtime activation (where applicable)
|
Security
|
-
Remote Authentication (LDAP, RADIUS, TACACS+, DMZ)
-
Inbound and Outbound Port filtering
-
Inbound and Outbound Trusted IP
-
MAC Address Filtering
-
PCI compatible
-
Secure Firmware Update
|
Power
|
-
Input Voltage: 7 to 36 VDC LTE
-
Idle Power: 900mW (75 mA @ 12VDC)
-
Standby Mode Power: 53 mW (4.4 mA @ 12 VDC) triggered on low voltage, I/O or periodic timer
-
Low voltage disconnect to prevent battery drain
-
Built-in protection against voltage transients including 5 VDC engine cranking and +200 VDC load dump
-
Ignition Sense with time delay shutdown
-
Configurable features and ports to optimize power consumption
|